How To Make 3 Band Loom Bracelet

Posted on

How To Make 3 Band Loom Bracelet – For this starburst, I’m using yellow for the starburst, navy blue for the border, and clear for the alternates like cape bands and what not. Next, you need your loom and your hook. Then, you need a place to sit and your imagination.

Pick up your loom and make sure the arrows are facing away from you. Next, take your navy blue band and place it on the second peg to the left from the center peg.

How To Make 3 Band Loom Bracelet

How To Make 3 Band Loom Bracelet

Then, take another navy blue band and place it on the front peg from the second left peg. Continue until you are at the end of the loom.

Rubber Band Bracelet Update

Now, take another blue strip and place it from the left peg to the middle top peg of the loom. Do the same on the other side of the loom.

Now that you have finished the border, take the yellow strip and place it on the second peg to the right of the second center peg of the loom. Do this until the loom is finished.

Then, take another yellow strip and place it on the center peg to the first right peg of the loom. Continue clockwise until done.

When you are done with that, take a clear strip and make a double cap with it. To do this. Take your band and make a figure 8 with it. Place it on top of the loom. Do this for each center peg of each star until you are at the bottom.

Loom Bracelets: Now For Grown Ups

First, turn your loom so that the arrows point towards you. Then, take your hook and loop through the middle of the first center peg. Continue in the opposite direction until the end of the loom.

Now, take your hook again and loop the blue band underneath. Do this for each band on the loom.

Now you’re ready to pull it off! First take the navy blue band and pull your hook through the top bands with a triple single.

How To Make 3 Band Loom Bracelet

Now, to make the stretch, you need to place the navy blue bands in a straight line over the loom.

Giving Smiles With Alphabet Beads Loom Band Bracelets Craft!

Pull it out, attach a C-clip, and you’re done! Congratulations! You’ve created your first Starburst! I am a Scottish girl running the highway of life with her own clan, navigating many twists and turns along the way.

Take one of the ‘S’ shaped clips and pull the loom band through it. It should look like the number ‘8’.

Thread the second color through the two loops made by the first band. Your second band should now look like ‘8’.

Make ‘8’ shapes with strips in alternating colors until you reach a length that fits the person’s wrist.

How To Make Rubber Band Bracelet Loom Pattern

To complete your bracelet, all you need to do is place the ‘8’ loops over the ‘S’ clip. Now, it’s ready to wear!

Bands are basically colored rubber bands that are fashioned as ornaments by the current generation of creative kids. You don’t need to buy any other equipment to make a bracelet – everything can be done by hand!

After spending some time as an assistant designer, I think I know how to help my fellow parents. So here’s my simple guide on how to help your kids design and make their own bracelets in ten minutes with no tools other than bands.

How To Make 3 Band Loom Bracelet

You can see how small the actual loom bands are. It’s so great, so small becomes a big win!

Liberry 7000+ Colorful Rubber Bands Bracelet Making Kit For Girls 3 To

Hi, I’m really amazed that you can do that with just a few words and pictures, I definitely want to do more.

It seems to be a favorite summer pastime this year. Thanks for taking the time to read and comment. 🙂

It’s amazing how big something as simple as elastic bands can be. You and your granddaughter will have a great time designing and creating; We did. 🙂

Oh thanks for this, I bought the kit (with the loom) for my oldest granddaughter who is six and still haven’t figured it out using the loom…I think we’ll try your method. Without the loom. With your simple step-by-step instructions, I am sure it will be very easy and fun for everyone.

How To Create Loom Bracelet Diy Projects Craft Ideas & How To’s For Home Decor With Videos

I love how cool and mysterious your name is. I’m glad it helped, it was a little tricky at first, to be honest… until I left the instructions and got it down. 🙂

It was good for his great niece. Thanks for reading and I hope it helps some parents avoid the ‘figure out how to do it’ stage.

It’s a craze that’s currently sweeping every age group and gender, and shows no signs of slowing down yet! Thanks for reading and you’re right, this is a great kids party.

How To Make 3 Band Loom Bracelet

Thank you for reading and commenting on the bill. My week is going well. 🙂 Hope yours is too.

Rainbow Loom, Loom Tutorial, Rainbow Loom Bracelet For Beginners, Easy Rainbow Loom, Loom Band Tutorial

I have seen children wearing these bracelets and thought they were very unique. When my husband went to visit his sister, his great niece went

This sounds like a fun project for kids, bro. This is a great activity for birthday parties. Everyone does their own party favors to keep them busy!

Very detailed instructions and well done, bro. I will send this to my step daughter. I hope she enjoys it.

I bought these rubber bands to see what all the fuss was about and your instructions are better than the printed ones! Their instructions don’t include the curved rubber band for the s-clip, which looks weird on the finished product. I will follow your hub instead!

Rainbow Loom Bracelet Craft Kit

Thanks Frank for reading and commenting; Especially since as far as I know it’s far from your chosen type.

After creating them through trial and error. I think a ten minute preparation with easy instructions will be of great help to parents. :)Hi guys! It’s been a while since my last tutorial, so I decided to show you how to make one of my favorite rainbow loom bracelets. It’s called the Dragon Scale Bracelet and today I’ll show you how to make three variations of this bracelet. The first and by far the most popular is the six peg variation.

For the six peg version, start by placing three infinity bands in your first color on the first six pegs. Now, place two bands of your second color on the second and third pegs, and the fourth and fifth pegs between the bands of your first color.

How To Make 3 Band Loom Bracelet

Now you take your hook and pull your first color strips over your second color strips, making sure they are twisted. Twisting the straps is important only for the first straps. You will draw blue bands on pegs two, three, four and five.

A Frugal Way To Make A Rainbow Loom Bracelets (diy)

Once you’ve pulled the blue bars, push all the bars down. Take three bands of your first color and place them on top of the other bands on the same pegs you placed the first bands of that color. These are not infinite in form. Now you’re going to use your hook to pull all the bands below that layer over the new bands. You’re going to do the same thing for your second band color, place two of them on the same pegs as you did the first, and pull the new bands down.

You’re going to continue this pattern, keeping the blue layer, drawing down and the white layer down until your bracelet is long enough to wrap around your wrist. Now it’s time to use your hook to take the two outer bands and pull them to the adjacent bands. You take the band on the first peg and move it to the second peg and move the sixth band to the fifth peg. Now there should only be straps on the four pegs. Now take the band from the third peg and move it to the fourth peg. There should now only be three pegs with the bands.

Add a C-clip to the three sets of bands and remove the bracelet from the loom. To connect the two ends, attach the other end of each clip to one of the bands on the other end of the bracelet, and you’re done!

The other two bracelets do not require full training. It’s the same idea, but you’re going to use a different number of pegs. For a simple four-pin triple, take two strips and connect them to the first and second pegs, and the second strip to the third and fourth pegs. Take your second colored strip and place it in an infinity shape

Handmade Rainbow Loom Rubber Band Bracelets Herringbone + Pick 3 Party Favors

How to make a finger loom bracelet, how to make a band loom bracelet, how to make fun loom bracelet, how to make a ladder loom bracelet, how to make a easy loom bracelet, how to make loom bracelet, how to make a basic loom bracelet, how to make a thick loom bracelet, how to make a crazy loom bracelet, how to make 3 band loom bracelet, how to make a bead loom bracelet, how to make loom bracelet without loom

Leave a Reply

Your email address will not be published. Required fields are marked *